Blog

A standard manual pallet jack typically weighs between 150 and 300 lbs (68–136 kg), with common models weighing about 165–200 lbs, designed to lift up to 5,500 lbs.

A forklift load center is the horizontal distance from the vertical face of the forks to the load’s center of gravity.

A pallet jack, also known as a pallet truck or pump truck, is a fundamental, manually operated (or electric) tool designed to lift and transport heavy palletized loads over short distances.

Using a forklift in a warehouse requires strict adherence to safety protocols: conducting pre-operation inspections, wearing seatbelts, driving with forks low (4–6 inches off the ground), and tilting the mast back for stability.

To use a manual pallet jack, insert the forks fully under a pallet, lower the lever to lift, and pump the handle to raise the load.

Forklift repairs must be made immediately if a safety defect is identified during required daily inspections, as operating a damaged machine violates OSHA regulations.

Forklifts use propane (LPG) primarily because it offers a high-power, clean-burning, and versatile fuel source that allows for 24/7 operation with minimal downtime.

The fulcrum of a forklift is located at the center of the front axle/wheels. It acts as the pivot point (like a seesaw) where the machine’s counterweight balances the load on the forks.

To properly move pallets with a forklift, approach the load slowly and squarely, ensuring forks are level and fully inserted.

The mast on a forklift is the vertical assembly at the front that lifts, lowers, and tilts loads. Comprised of nested, hydraulically powered steel channels and chains, it controls the carriage and forks to move materials vertically.